
- 德國Klauke柯勞克
- 日本HONDA本多
- 日本ADCMT愛德萬
- 日本尾崎PEACOCK
- 日本濱松HAMAMATS...
- 日本USHIO牛尾
- 日本松下Panasoni...
- 日本YUMEX優美科思
- 日本INFLIDGE英富...
- 日本SURUGA SEI...
- 渡邊電氣工業株式會社
- 矢島光學
- Asker
- CEDAR
- KOEI
- Tokuden
- HIOS
- NCC
- PRINCE
- veccl
- MYCOM
- KALMOR
- RICOH
- 日本ST
- 日本miruc
- PONY
- 倉敷化工株式會社
- NPM
- 閉環步進電機PULSER...
- 同步電機
- 步進電機
- 直線步進電機
- 直線伺服電機
- 設施
- 溫度計
- 隔膜壓力表
- 波登管壓力表
- GPD型儀表保護器
- 臺式油壓機
- 退磁、退磁設備及相關設備
產品構成
工具
送錫槍
技術參數
AC適配器:9.2 x 9.2 x 10.2 in / 6.94 lb
環境工作溫度:10 to 40 C / 50 to 104 F
峰值功率:130 W - 23,5 V
焊嘴與接地間電阻:<2 ohms
焊嘴與接地間電壓:<2 mV RMS
Selectable Temperature:90 to 450 C / 190 to 840 F
Max. and min. temperature:Limit the temperature range in which the operator is allowed to work.
USB-B:Software PC / Firmware update
Voltage (AC):Ref. CA-1QE - 120 V
Package:234 x 234 x 258 mm / 3.15 kg
Temperatue levels:Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement.
PIN protection:Keep station parameters protected against unauthorized access.
Sleep and Hibernation mode:These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life.
Control Unit:150 x 175 x 145 mm / 2,67 kg
Wire diameter:0.8 to 1.5 mm / 0.02 to 0.07 in
連接工具
AP250-A送錫槍
附件
CC3702集線器